Model: CF Wireless Charger
Input: 5V/2A or 9V/1.67A
Output: 10W, 7.5W, 5W (can customize 15W)
Wireless charging Output: 5V/1.6A Max
USB charging output: 5V/1A
Wireless Charging Efficiency: ≥75%
Receiving Distance: ≤8mm
Product Size: 131*77*13mm
Compatibility: All QI wireless charging enabled phone device and regular phones.
What’s in the package
Wireless Charger x 1
Dashboard holder x1
Air Vent Clip x 1
Type C Cable x 1
User Manual x 1
For charging Qi-enabled Devices.
The wireless charger output power is more than 10W, which is suitable for iPhone 7.5W and normal 5W wireless charging too.
Built-in coil sensor, the two clamps will open automatically when you when your phone touches the chaging area.
The telescopic clamps will stretch out automatically and draw back flexibly, therefore it becomes so easy to put your phone on the stand or take it off.
The handle supports 360° free rotation, which enables you to find suitable direction to place your phone, also you can lock the charger on the air vent too.
Conversion efficiency ≥75%
Silent motor works quietly without any noise.
Over charging protection, the charger will shift to standby mode immediately upon the device battery is full charged.
Built-in large capacitor, this makes the clamps can open and close for three times even when you turn off the car engine.
When the device is powered on, the voice broadcasts “power on”; when the phone is charging, the voice broadcasts “fast charging”; when the power is turned off, the voice broadcast “power is disconnected”. The content of the voice messages could be customized.
The charger pad with an spare USB port at side, which can provide 5V/1A charging power for mobile phones which do not have wireless charging feature.
Certifications: CE, FCC, RoSH.
Please install the wireless charging device on the air outlet bracket or the suction cup holder.
Using type-C cable for connecting the charger pad and car charger.
The LED indicator with three colors shows different status. When the phone is on charging, the red light on. Mobile phone without wireless charging, green light on, and blue light on when standby.
When you start car engine, the charger’s clamps will open automatically, while you turn off the car engine, the charger’s clamps will close automatically.
When defect foreign object, green LED light is on.
When you want to take off your phone, please touch the switch to open the clamps. Touch the switch, the two levers will open.
Please use the QC 2.0 or QC 3.0 car charger to supply the wireless car charger enough input power.
This device is free from defects in material and workmanship under normal use for 12 months commencing upon the date of purchase. Proof of purchase is required for warranty service. The consumer should never attempt to open or dissemble the device, and doing so may cause damage that voids your warranty.
At EFFIET, we believe in our product quality. That’s why we back all of our product with an 12-month warranty and provide friendly, easy-to-reach support.